Intel Management Engine Interface Driver Code 10 Solved

Intel Management Engine Interface Driver Code 10 [Solved]

Driver Easy Free fixes ‘The Device cannot start Code 10’ error immediately!

If you see a yellow exclamation mark, or a question mark next to your Intel (R) Management Engine Interface (IMEI) device name in Device Manager, don’t panic, we’ve got some fixes for you. You might find it hard to believe, but this problem is not as serious as you think, and the fix for it could be as simple as pie.

Try these fixes, one at a time

Here are 3 of the most effective methods for you to try. You may not have to try them all; just work your way down until you find the one works for you.

What is Intel Management Engine Interface (IMEI)?

Method 1: Windows Update

First of all, you need to check to see if you have any updates or patches from Windows Update that you missed out on. If find any, please update them first before you proceed with the following steps.

1) On your keyboard, press the Windows logo key and I at the same time, then click Update & security.

2) Click Check for updates.

If found any, please make sure you update all of the device drivers or patches. Then restart your computer.

Method 2: Manually reinstall driver

The Code 10 error in Device Manager usually indicates driver error. In some cases, the driver error could be related to wrong driver installed. To fix it:

2) Click to expand System devices. Right-click Intel (R) Management Engine Interface and click Uninstall.

3) When prompted with the uninstall confirmation, check the box for Delete the driver software for this device, and then click OK to continue.

3) Reboot your computer. Windows will automatically help you update the correct driver once you restart.

Method 3: Update the driver

If the above method doesn’t solve your problem, its’ likely that you’re using the wrong driver altogether.

There are two ways you can get the right drivers for your video card and monitor: manually or automatically.

Manual driver update – You can update your Intel Management Engine Interface drivers manually by going to the manufacturer’s website for it, and searching for the most recent correct driver for each. Be sure to choose only drivers that are compatible with your variant of Windows 10.

You can update your drivers automatically with either the FREE or the Pro version of Driver Easy. But with the Pro version it takes just 2 clicks (and you get full support and a 30-day money back guarantee):

2) Run Driver Easy and click the Scan Now button. Driver Easy will then scan your computer and detect any problem drivers.

3) Click the Update button next to the flagged Intel Management Engine Interface driver to automatically download and install the correct version of this driver (you can do this with the FREE version).

Or click Update All to automatically download and install the correct version of all the drivers that are missing or out of date on your system (this requires the Pro version – you’ll be prompted to upgrade when you click Update All).

Fix Windows 10 Intel Management Engine Interface error

Windows 10 pause updates

Intel Management Engine Interface is a built-in driver that activates a few dedicated/specialized features available for your motherboard. Shortly, if these drivers are functional, you can remotely control your computer even if your PC is turned off or if it isn’t installed with an OS. Of course, the basic functionality is far more complex, but what interests us today is how to fix the issues that are related to the IMEI engine.

So, if you received a system error saying that ‘This device cannot start (Code 10),
STATUS_DEVICE_POWER_FAILURE’ you should follow the troubleshooting solutions from below. Do note that all the steps explained below are compatible with the Windows 10 system, though similar guidelines can be followed and applied for older versions of Windows too.

How to fix the status_device_power_failure Intel error on Windows 10

1. Apply Windows 10 updates

A system update can fix the problems related to the IMEI drivers. So, what you need to do is to verify if there are updates pending for your approval; if there are, you need to follow on-screen prompts and apply these updates as soon as possible. In that respect, you can use these steps:

Note – If you received the ‘Intel Management Engine Interface status_device_power_failure’ error message after a system update was received and applied, you can choose to remove this patch from your computer.

Here is how you can uninstall a recently applied Windows 10 firmware patch:

2. Update the drivers

Usually, a driver error is received because of system incompatibility issues. So, you can address such issues easily, by updating these drivers:

Doing manual updating of all the drivers can be a tiresome task. That’s why to speed up and get the best result you may think to use a third-party solution that updates and corrects drivers automatically.

Run a System Scan to discover potential errors

Restoro Download

Restoro Scan

Click Start Scan to find Windows issues.

Restoro Fix

Click Repair All to fix issues with Patented Technologies.

The tool recommended below is especially easy to use and effective so you will get maximum results with little to no effort on your part.

Various errors are the result of a malfunctioning driver. When this is the case, you may need to update or reinstall completely this specific component. As the process is not straight-forward to complete, we recommend using an automated tool for the job. Here’s how to do it:


Keep your Windows safe from any type of errors caused by corrupted drivers, by installing and using DriverFix today!

Disclaimer: this program needs to be upgraded from the free version in order to perform some specific actions.

3. Remove and manually reinstall the drivers

If updating the drivers isn’t the right solution for you, then a better idea will be to remove these drivers from your PC and manually reinstall them afterward. This should fix the incompatibility issues along with similar other problems such as internal corrupted files. Here is what you need to follow:

4. Run a system scan

General errors can be automatically fixed by initiating a built-in troubleshooter. This is a software troubleshooter that scans for problems within the Windows core system. If problems are found, the software will automatically fix everything – here is what you need to do:

5. Update BIOS

If the troubleshooting steps from above aren’t resolving the Intel Management Engine Interface driver issues you should try to update BIOS. Now, depending on your manufacturer and on your particular motherboard you can complete the update process automatically, through the BIOS interface.

Otherwise, you have to download the updated patches for your BIOS system from your manufacturer’s official website. Hopefully, this last solution is also the method that addresses the IMEI malfunctions.


Those are the methods that should help you fix the Intel Management Engine Interface status_device_power_failure problem. If you are still experiencing the same Windows 10 issues don’t panic; return here and use the comments field from below for describing the malfunction. Afterward, based on the info you provide we will try to find a perfect solution for your particular situation.


idee restoroStill having issues? Fix them with this tool:


https://www. drivereasy. com/knowledge/intel-r-management-engine-interface-this-device-cannot-start-on-windows-solved/

https://windowsreport. com/intel-status-device-power-failure/

Понравилась статья? Поделиться с друзьями:
Добавить комментарий

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: